Pushbutton models—Activation
Pushbutton deactivation
By default, the pushbutton on ScanPlus pushbutton models is deactivated.
Pushbutton activation
To activate the pushbutton, you must select a pushbutton operating scenario.
The same three operating scenarios are available for all ScanPlus pushbutton models
(standard or energy saver):
Active For Read Duration (2 s)—Repeat Read Duration After Good Read
Active For Read Duration (2 s)—Standby After Good Read
Active While Pushbutton Pressed—Standby After Good Read
The ScanPlus does not flash in standby when the pushbutton is activated.
SP/XX/RM/10/E/960401
Pushbutton models—Activation
Pushbutton Not Active (*)
109