Table of Contents
Advertisement
Compose interface number
Which interface number?
To know which interface number to enter, check the following points
in the order shown:
1. Look to see if there is a suitable number in the Predefined interface
numbers section for your interface.
2. Look to see if your configuration is described in the ScanPlus
Terminal List (if available).
3. If you still do not know which number to enter, contact your UBI
representative.
Entering an interface number usually only modifies data transmission parameter settings
but in some special cases, other parameter settings (pushbutton activation, indicator
LED / beep settings, symbologies, etc.) may be modified for specific interface
configurations.
Do not enter an interface number that is not compatible with the interface-
specific software and hardware configuration of your ScanPlus model—check the
ScanPlus Part Number if you do not know the interface for your model (
Composing an interface number
Example
To enter the number 102:
1. Scan Compose Interface Number on the next page.
2. Scan each digit of your interface number using the number codes—in our
3. Scan End Selection to finish.
SP/XX/RM/10/E/960401
example we would scan 1, then 0, then 2.
Compose interface number
Interfaces ).
25
Advertisement
Table of Contents
