Compose read duration
By default, the ScanPlus remains active (reading) for 2 seconds when the pushbutton is
pressed.
Activating the pushbutton (standard or energy saver pushbutton models) resets the
default read duration value (2 s). If you want to modify the read duration, you must
select Compose Read Duration after you have activated the pushbutton.
Example
To make your ScanPlus remain active and read for 20 seconds after you
have pressed the pushbutton:
1. Scan Compose Read Duration.
2. Scan 2 0 then scan End Selection (
SP/XX/RM/10/E/960401
Pushbutton models—Activation
Compose Read Duration
(default 2 s, maximum = 65 s)
back cover of this manual).
Number codes or inside
115