Inter-character delay
The maximum rate at which data can be transmitted by the ScanPlus is affected by the
response of the system. By the insertion of an inter-character delay, the ScanPlus can avoid
dropping characters if it is transmitting decoded data too rapidly.
This feature can only be used with keyboard wedge and RS-232 interfaces and OCIA
cash registers.
Predefined delay values
No Delay (*)
20 ms
40 ms
Compose inter-character delay
Example
To make your ScanPlus insert an 80 ms delay between characters:
1. Scan Compose Inter-Character Delay on the next page.
2. Scan
3. Scan End Selection.
SP/XX/RM/10/E/960401
8
then
0.
Inter-character delay
10 ms
30 ms
50 ms
49