Table of Contents
Advertisement
Transparent configuration mode
Transparent Configuration Mode allows you to use the ScanPlus (and the present
Reference Manual if required!) to configure other UBI products.
Transparent configuration mode remains active until you switch off the ScanPlus.
Example
To use your ScanPlus to configure UBI's OmniImage product:
1. Connect the ScanPlus to the OmniImage in wand emulation mode
2. Scan Transparent Configuration Mode.
3. Use your ScanPlus to scan the desired configuration codes for
4. Switch off the ScanPlus to deactivate Transparent Configuration Mode.
SP/XX/RM/10/E/960401
Transparent Configuration Mode
(Wand/Magstripe connector of the OmniImage).
interpretation by the OmniImage.
Configuration modes
31
Advertisement
Table of Contents
