Installation procedure
Installation procedure
The ScanPlus Installation Guide tells you step by step how to install and set up your
ScanPlus to operate successfully in most working situations.
General installation / configuration procedure
1. Check you have everything you need (
2. Switch off the host system and connect up your ScanPlus
(
3. Switch on the host system.
4. Scan the interface number for your system (
numbers for your interface or Compose interface number).
5. Customize the data transmission settings for your interface if required
(
6. Select the symbologies you need and customize the symbology
parameter settings if required (
7. Customize the ScanPlus operating settings if required (
list / data strings and individual operating parameter entries).
48
Connection for your interface).
Data transmission parameters for your interface).
Product checklist).
Predefined interface
Symbologies).
SP/XX/RM/10/E/960401
Parameter