Table of Contents
Advertisement
Reset all configuration parameters
Reset all configuration parameters
Reset factory defaults
Reset Factory Defaults resets all the ScanPlus parameters to their factory default settings:
null interface (no interface driver selected—no transmission),
default symbologies,
default symbology settings,
default ScanPlus operating settings (pushbutton deactivated, LED / beep settings, etc.).
Parameter list / data strings provides the full list of parameters and default settings.
If you scan Reset Factory Defaults, you will have to re-enter the appropriate
interface number for your system and any custom settings if applicable. It is often
easier to reset individual parameters.
General reset procedure
1. Make a list of your custom ScanPlus parameter settings if applicable.
2. Scan Reset Factory Defaults.
3. Scan the interface number for your system (
numbers for your interface or Compose interface number).
4. Customize the data transmission settings for your interface if required
(
5. Select the symbologies you need and customize the symbology
parameter settings if required (
6. Customize the ScanPlus operating settings if required (
list / data strings, Pushbutton models—Activation, etc.).
116
Reset Factory Defaults
Data transmission parameters for your interface).
Predefined interface
Symbologies).
SP/XX/RM/10/E/960401
Parameter
Advertisement
Table of Contents
