Table of Contents
Advertisement
5
Set up the data transmission
parameters
data transmission
parameters
Scanning the interface number automatically configures your ScanPlus
to suit your operating environment by modifying the settings for data
transmission to the host system.
This section lists the data transmission parameter settings for all the
host systems supported and provides some common data transmission
options for output to keyboard wedge and RS-232 host systems—use
your ScanPlus to read the configuration codes if required.
The full set of data transmission parameter options for all the host system
interfaces supported is provided in the ScanPlus Reference Manual .
Keep a list of your custom settings—this will be useful if you have to perform a
reset.
Resetting the predefined data transmission settings
If you want to reset all the predefined data transmission settings for
your host system, rescan the appropriate host system interface number
(see section 4, Enter the interface number for your host system).
Selecting the interface number usually only modifies data transmission
settings, but in some special cases, other parameter settings—
pushbutton activation, beep/indicator LED settings, symbology
settings—may be modified for specific interface configurations.
SP/XX/IG/12/E/980228
interface-specific communication parameters—in certain cases they
need to be modified to optimize the performance of the ScanPlus
5-1
Advertisement
Table of Contents
