Table of Contents
Advertisement
2. Switch off the host system and connect up the ScanPlus
RS-232—Direct connection
1. Switch off the host system.
2. Connect the ScanPlus to the host computer.
RS-232—Single-output CMM and external power supply
1. Switch off the host system.
2. Use the single-output RS-232 CMM to
connect the ScanPlus to the host computer.
Do not switch on the host computer
until you have connected up and
plugged in the external power supply.
2-4
RS-232 Port
power
Power
Supply
supply
single
RS-232 CMM
Ö
serial port
Ö
serial port
Reader
Pin assignments for the single-
output
RS-232
CMM
described in Appendix A.
SP/XX/IG/12/E/980228
are
Advertisement
Table of Contents
