7. Set up the operating parameters—Activate the pushbutton
Pushbutton models
Activation—Standard pushbutton models
Only supported by ScanPlus models with part numbers 0-xxxxxx-2x-xx.
Do not use this code with ScanPlus models that do not have a pushbutton.
Activation—Standard pushbutton models—Aiming beam
Only supported by ScanPlus ER / XP / PDF models with part numbers 0-xxxxxx- 2 x-xx.
Do not use this code with ScanPlus models that do not have a pushbutton.
Activation—Energy saver pushbutton models
Only supported by ScanPlus models with part numbers 0-xxxxxx- 1 x-xx.
Do not use this code with ScanPlus models that do not have a pushbutton.
7-4
Standard Pushbutton
Active For Read Duration (2 s)—Standby After Good Read
Standard Pushbutton—Aiming Beam
Active For Read Duration (2 s)—Standby After Good Read
Energy Saver
Active For Read Duration (2 s)—Standby After Good Read
SP/XX/IG/12/E/980228