Peel-Off (Self-Strip) - Intermec EasyCoder 501 S Installation And Operation Manual

Peel-Off
(Self-strip)
1
Open the front and side doors.
Intermec EasyCoder 501 S – Installation & Operation Ed. 1
The EasyCoder 501 S printers can print on labels, tickets, tags, and
continuous stock in various forms. This section describes the case
when self-adhesive labels are separated from the liner immediately
after printing. The liner is then wound up on an optional integral liner
takeup hub. This is also known as "Self-strip" operation.
Peel-off can only be used for:
• Self-adhesive labels with liner
2
Turn the printhead lift lever to "Load" posi-
Chapter 5 Media Load
tion.
35