Performance; Memory Allocation - Intermec EasyCoder 501 S Installation And Operation Manual

Chapter 7 Setting Up the Printer
Setup Parameters, cont.
Service, cont.
68

Performance

The Performance setup parameter has no meaning for the EasyCoder
501 S, because it has fi xed print speed of 100 mm/sec. (4 inches/sec.)
regardless of supplies and printhead density.

Memory Allocation

The Memory Allocation parameters allow you to set the size for
three kinds of memory buffers:
• The Image Buffer stores the printout image before printing and
during batch printing. To ensure that high print speed is sustained
during the printing of demanding label formats, the size of the
Image Buffer may need to be increased. The maximum size of
the image buffer is 250 kbytes.
• The Receive Buffer stores the input data received on the serial
communication channel "uart1:" before processing..
• The Transmit Buffer stores the output data on the serial
communication channel "uart1:" before transmission.
Intermec EasyCoder 501 S – Installation & Operation Ed. 1