Intermec EasyCoder 501 S Installation And Operation Manual page 68

Setup Parameters, cont.
Service, cont.
Intermec EasyCoder 501 S – Installation & Operation Ed. 1
Testprint
This option allows you to print a series of test labels as illustrated
below. The labels are the same as in the "Test Label" option in the
Intermec Shell program, see Chapter 9.
First, four test labels intended to facilitate adjustment of the
printhead pressure and alignment are printed. Then comes one or
more labels showing the printer's current setup, before the loop
starts all over again.
618 ohms / 8 dots
Test Label 1
CODE39
1 23 45 67 890 12 8
Test Label 3
Test Label 5...
Chapter 7 Setting Up the Printer
Test Label 2
CODE39
Test Label 4
67