Water Jacket Joints And Water Pump - Yamaha YZF1000RJ Service Manual

ENGINE REMOVAL
I
ENG
l'\al
4-4
3.Remove:
• Drive sprocket cover G)
• Dowel pins
• Gasket
4.Loosen:
• Drive chain
Refer to "DRIVE CHAIN SLACK ADJUST-
MENT" in CHAPTER 3.
5.Straighten:
• Lock washer tab @
6.Remove:
• Nut (drive sprocket) G)
• Lock washer®
• Drive sprocket @
NOTE:
While applying the rear brake loosen the
drive sprocket nut.
WATER JACKET JOINTS AND WATER
PUMP
1.Disconnect:
• Coolant reservoir hose G)
2.Remove:
• Radiator hose (inlet)®
• Water jacket joint (outlet)@
(with the thermostatic valve housing and
carburetor heater hoses)
• O-rings
• Carburetor joints@
(with the vacuum hose)
• O-rings
•
•
•
·•
•
•
•