Yamaha YZF1000RJ Service Manual page 213

•
•
•
•
•
•
•
ENGINE ASSEMBL
v
AND ADJUSTMENT
I
ENG
I '-I
4- 79
NOTE:
• The camshaft caps are numbered from
left to right.
• Apply engine oil onto the camshaft cap
bolt threads.
• Do not install the bolts at places marked
with a
"*"
at this stage.
• Tighten the camshaft caps in a crisscross
pattern starting from the center.
i i - I : _________ _
The camshaft caps must be tightened
evenly or damage to the cylinder head,
camshaft caps and camshafts will result.
• Install the timing chain guide on the
exhaust side.
**********************************
EB404202
TIMING CHAIN TENSIONER
1.lnstall:
• Timing chain tensioner
**********************************
Installation steps:
• Remove the tensioner cap bolt G), copper
washer
®
and springs @.
•Release the timing chain tensioner one-
way cam @ and push the tensioner rod
®
all the way in.
e
Install the tensioner with a new gasket
®
onto the cylinder.
NOTE:
The "UP" mark@ on the tensioner should
face up .
~
Bolt (timing chain tensioner):
~
10 Nm (1.0 m • kg, 7.2 ft• lb)
elnstall the springs @, copper washer
®
and cap bolt G) .
~
,.. Cap bolt (timing chain tensioner):
~~
20 Nm (2.0 m • kg, 14 ft• lb)
**********************************