Installation - Yamaha YZF1000RJ Service Manual

•
•
•
•
•
•
•
______________ 0_1L_c_o_o_L_ER_lcooLI
~
I
5-7
EB501020
INSTALLATION
Reverse the "REMOVAL" procedure.
Note the following points.
1.Clean the mating surfaces of the oil cooler
and the crankcase with a cloth dampened
with lacquer thinner .
2.Lubricate:
• O-ring
CD
•Bolt®
Recommended lubricant:
Engine oil
A
WARNING
Always use a new O-ring on the oil cooler.
3.lnstall:
• O-ring
• Oil cooler
NOTE: - - - - - - - - - - - - -
Make sure that the O-ring is positioned
properly.
~
Bolt (oil cooler):
~
63 Nm (6.3 m • kg, 45
ft •
lb)
4.lnstall:
• Oil filter
Refer to "ENGINE OIL REPLACEMENT" in
CHAPTER 3.
~
Oil filter:
~
17 Nm (1.7 m • kg, 12
ft•
lb)
5.Fill:
• Cooling system
• Crankcase
Refer to "COOLANT REPLACEMENT"
and "ENGINE OIL REPLACEMENT" in
CHAPTER 3.
6.lnspect:
• Cooling system (oil cooler)
Decrease in pressure (leaks) ➔ Replace
the oil cooler as required.
Refer to "RADIATOR - INSTALLATION" .