ENGINE ASSEMBLY AND ADJUSTMENT
I
ENG
I '\al
5.lnstall:
• Dowel pin G)
•
• 0-ring
®
A
WARNING
Always use a new O-ring.
•
6.Set the shift cam and transmission gears
in the neutral position.
•
7.lnstall:
• Lower crankcase G)
(onto the upper crankcase
®)
NOTE:
• Carefully guide the shift forks so that they
mesh smoothly with the transmission
gears.
• Mesh shift fork "L" with the 4th wheel
.,,
gear @ and shift fork "R" with the 5th
wheel gear@ on the drive axle.
• Mesh shift fork "C" with the 3rd pinion
gear® on the main axle.
•
Before tightening the crankcase bolts,
check the following:
• Make sure that the gears shift correctly
~
when the shift cam is turned by hand.
..
l
•
•
•
4- 62