Yamaha YZF1000RJ Service Manual page 217

•
•
•
•
•
•
•
ENGINE ASSEMBL V AND ADJUSTMENT
I
ENG
I '\al
4-83
2.lnstall:
• Collars G)
• Mounting bolt (rear-lower)®
• Mounting bolt (rear-upper)@
• Mounting bolts (front) @
• Pinch bolts
®
NOTE: _ _ _ _ _ _ _ _ _ _ _ _
First, install all of the bolts and nuts and
then tighten them to specification.
3.lnstall:
Mounting bolt (rear-lower):
50 Nm (5.0 m • kg, 36 ft • lb)
Mounting bolt (rear-upper):
50 Nm (5.9 m • kg, 36 ft • lb)
Pinch bolt (rear-upper):
22 Nm (2.2 m • kg, 16 ft• lb)
Mounting bolt (front):
40 Nm (4.0 m • kg,
29 ft • lb)
Pinch bolt (front):
22 Nm (2.2 m • kg, 16 ft • lb)
• Gaskets (exhaust pipe)
• Muffler assembly G)
• Washer
• Stay (exhaust pipe) ®
• Nut (exhaust pipe)
Bolt (muffler and stay):
38 Nm (3.8 m • kg, 27 ft • lb)
Bolt (exhaust pipe):
20 Nm (2.0 m • kg, 14 ft• lb)
Nut (exhaust pipe and stay):
20 Nm (2.0 m • kg, 14 ft• lb)