Yamaha YZF1000RJ Service Manual page 324

•
•
•
•
•
•
•
REAR sHocK ABSORBER AND sw1NGARM
lcHAsl~I
7 - 69
Recommended lubricant:
--all'I
Molybdenum disulfide grease
2.lnstall:
• Collars
• Rear shock absorber
Nut (rear shock absorber - upper):
40 Nm (4.0 m • kg, 29 ft • lb)
Nut (rear shock absorber - lower):
40 Nm (4.0 m • kg, 29 ft • lb)
Nut (relay arm - frame):
48 Nm (4.8 m • kg, 35 ft • lb)
NOTE: - - - - - - - - - - - - -
• When installing the rear shock absorber
lift up the swingarm.
• Insert the front connecting rod bolt from
the right.
Swingarm
Reverse the "REMOVAL" procedure.
Note the following points.
1.Lubricate:
• Bearings
• Inner collars
• Thrust covers
• Pivot shaft
Recommended lubricant:
--all'I
Molybdenum disulfide grease
2.lnstall:
• Swingarm
Nut (pivot shaft):
125 Nm (12.5 m • kg, 90 ft • lb)
3.lnstall:
• Relay arm
• Connecting rods (left and right)
Nut (relay arm):
48 Nm (4.8 m • kg, 35 ft • lb)
Nut (connecting rod):
48 Nm (4.8 m • kg, 35 ft • lb)
Insert the bolts from the right.