Yamaha YZF1000RJ Service Manual page 270

•
•
•
•
•
•
•
_________ F_R_o_N_T _A_No_RE_A_R_B_R_A_K_Es_lcHASIAI
346-022
5
I~
Wear limit:
0.5
mm
(O.tn In)
I
4.lnstall:
• Brake pad shims
(onto the brake pads)
• Brake pads
• Brake pad spring
**********************************
Installation steps:
•Connect a suitable hose
CD
tightly to the
brake caliper bleed screw®· Put the other
end of the hose into a container.
• Loosen the brake caliper bleed screws
_. and use a finger to push the caliper pis-
7 - 15
tons into the brake caliper.
• Tighten the brake caliper bleed screws ®·
~
- Brake caliper bleed screw:
~~
6 Nm (0.6 m • kg, 4.3
ft •
lb)
• Install a new brake pad shim @ onto the
new brake pad @ .
NOTE:
The arrow mark @ on the brake pad shim
must point in the direction of brake disc
rotation.
e
Install new brake pads and a new brake
pad spring®·
NOTE:
The longer tangs <6) of the brake pad spring
must point in the direction of the brake disc
rotation.
**********************************
5.lnstall:
• Retaining pins
• Retaining clips
• Brake pad cover
• Brake caliper
Bolt (brake caliper):
40 Nm (4.0 m • kg, 29
ft •
lb)