Table of Contents
Advertisement
<D
Rear brake switch lead
®
Battery
8
lead
@ Battery (±) lead
@ Sidestand switch lead
cABLe RouT1NG
lsPEcl
g-.1
(29
Use a plastic band to fasten the starter motor lead, AC generator
lead, GPS (gear position switch) lead, sidestand switch lead and
pickup coil lead. Fold the AC generator lead so that there is no slack
in it.
[ID Be sure the wire harness does not contact the EXUP servo motor.
@ Pass the EXUP cables over the ground lead and then pass the other
leads and hose over the l=XUP cables.
[Q] Pull the rubber covers over the EXUP servo motor coupler, rear
brake switch coupler, GPS (gear position switch) coupler and
pickup coil coupler, then insert them between the EXUP cables and
the starter motor.
2- 34
•
•
•
•
•
•
Advertisement
Table of Contents
Troubleshooting
