Configuring Multiple Janus Rf Devices Using Batch Files - Intermec JANUS JG2010 User Manual

Configuring Multiple JANUS RF Devices Using Batch Files

The Installation Utility disk contains five batch files that can help you easily
configure multiple JANUS devices if you have exited the Installation Utility.
You can quickly edit a file in the DRIVEC or DRIVED subdirectory and then
use the batch files to create the JANUS drive image and download it.
These batch files exist after you have run the Installation Utility once AND you
have saved your files that were created by a previous install. That is, during the
first install, you need to choose N when prompted with this question:
Do you want to delete the files created by the install? (Y/N)
When the files created by the install are saved, the applicable batch files are also
copied from the Installation Utility disk to the \IM_FLASH directory. If you
performed a complete installation, that is if you did not use any switches after
you typed the pcsetup command, all batch files are copied to this directory. If
you used the /drivec or /drived switch, only the applicable batch files are
copied.
MKC.BAT Creates the JANUS drive C image on the host PC from the files in
the \IM_FLASH\DRIVEC directory.
LOADC.BAT Downloads the JANUS drive C image to the connected JANUS
device.
MKD.BAT Creates the JANUS drive D image on the host PC from the files in
the \IM_FLASH\DRIVED directory.
LOADD.BAT Downloads the JANUS drive D image to the connected JANUS
device.
LOADALL.BAT Downloads the JANUS drive C image, drive D image, and the
system images to the connected JANUS device.
To create and download a modified drive C image
1. Make any changes to the files in the \IM_FLASH\DRIVEC directory.
2. Connect your JANUS RF device to the host PC using a null modem cable.
3. On the host PC, go to the \IM_FLASH directory.
4. On the host PC, type mkc and press Enter. The batch file runs the JANUS
To connect a JG2010 or JG2020, you also need a communications dock or
optical link adapter. Refer to your JANUS user's manual for more
information.
drive image builder utility and creates the binary image file
\IM_FLASH\DRIVE_C.IMG.
B
Helpful Information
B-13