Table of Contents
Advertisement
Other Useful Files
Several other files are installed on the JANUS when you run the installation
utility program.
The following are examples of these files.
APP.BAT for LAN WorkPlace for DOS
@echo off
c:\tnvt 192.9.175.1
c:
cd \
APP.BAT for NetWare Client for DOS
@echo off
call c:\imlogin.bat
c:
cd \
APP.BAT for FTP Application
An APP.BAT file is not automatically generated for FTP. If you are using the
FPT stack, you will need to create this file to call a network application.
APP.BAT calls the network application.
GO.BAT can be run from the DOS command line. It reloads the network
drivers, and then calls the application.
UNNET.BAT file unloads the radio and network drivers. Unloading the
network drivers is performed to maximize battery life, and to provide the
maximum amount of conventional memory on the JANUS device.
IMLOGIN.BAT changes to the network drive and logs in to the NetWare
network.
IMLOGOUT.BAT unloads the radio and network drivers and logs out of
the NetWare network
UDPPLUS.INI contains the IP address of the Model 200 controller and the
JANUS device.
Deleted, Modified, and New Files
A
A-27
Advertisement
Table of Contents
