Table of Contents
Advertisement
JANUS 2.4 GHz Installation Utility User's Manual (4MB)
A Typical Intermec 2.4 GHz RF Network
How the Installation Utility Works
1-4
Frees enough space on the JANUS device to install the network software.
The Installation Utility deletes the IRL Desktop, the Intermec 900 MHz RF
Protocol Handler, and some DOS utilities.
Provides a shell out option before the drive images are built to allow you to
change the contents of the drive images, add a security ID, modify JANUS
configuration parameters, or perform any other DOS command.
Saves time when configuring multiple JANUS RF devices by retaining the
drive C and drive D images from the first device.
In a typical Intermec 2.4 GHz RF network, the JANUS RF devices communicate
with the access points, wireless to wired bridges, that pass the packets through
Ethernet on to the host.
Host
Ethernet
This section provides you with an overview of how the Installation Utility
works.
1. JANUS drive images are extracted from the companion disks.
2. Selected JANUS files are removed from the drive C and drive D
subdirectories to create space for the network software and radio drivers.
Network software, radio drivers, configuration files, and optional
terminal emulation software are added.
Data collection applications can be added.
3. New JANUS drive C and drive D images are downloaded to the connected
JANUS device.
JANUS
Devices
Access
Point
JANUSQ.001
Advertisement
Table of Contents
