Table of Contents
Advertisement
JANUS 2.4 GHz Installation Utility User's Manual (4MB)
About the Radio Parameters
Use the Radio Parameters screen to configure the parameters that are required
for your JANUS RF device to communicate with access points. All devices in
the same subnetwork must have the same domain and the same security ID.
Security IDs are optional. Use different domains on devices if they are in the
same area and you want the devices to communicate to different hosts.
Each domain (subnetwork), must have one acting master to coordinate
communications from the various stations. For most network operating
systems, the access point is the master. If the master unit is turned off or is out
of range, then one of the other access points configured as an alternate master
becomes the master. For most network operating systems, the JANUS RF
devices are stations.
If the inactivity settings are exceeded and your radio is placed into Sleep mode,
you can wake up the radio by either answering yes to the Wake Up on
Broadcast parameter, or you can physically suspend and resume the JANUS RF
device (press the
Note: Intermec recommends that you keep the default settings for Inactivity Minutes
and Inactivity Seconds. The default setting ensures that you will receive optimum
battery life on JANUS devices with removable batteries.
2-10
L
button twice) when the device is running.
Advertisement
Table of Contents
