Ftp Pc/Tcp For Dos Parameters - Intermec JANUS JG2010 User Manual

FTP PC/TCP for DOS Parameters

Field
Path to Network Installation
Temporary drive for flash
images
Install Novell compatibility
shim
Station IP Address
Subnet Mask
Default Router
Preparing to Run the Installation Utility
Description
Enter the location (drive:\pathname) of FTP PC/TCP
files on your host PC.
Enter the hard drive (or partition) on your host PC
that you want to use as a scratch drive to build the
JANUS drive images. It must have at least 14MB
free.
(Optional) Installing the Novell compatibility shim
allows you to run applications written for the Novell
stack to run on top of the FTP stack.
Enter the JANUS device IP address.
The Installation Utility enters the first part of the
subnet mask based on the Station IP address. Enter
the last part of the subnet mask.
The Installation Utility enters the first part of the
default router address based on the Station IP
address. Enter the last part of the default router
address.
2
2-9