About The Net.cfg Parameters; Pctcp.ini File - Intermec JANUS JG2010 User Manual

JANUS 2.4 GHz Installation Utility User's Manual (4MB)

About the NET.CFG Parameters

Depending on how you filled in the fields in the Installation Options screen, the
following parameters are added to the NET.CFG file.
IP Address, Default Router, Subnet Mask When the TCP/IP protocol stack is
loaded, it checks for values for the IP address, default router, and subnet mask.
If it does not find values for these parameters, the TCP/IP stack generates a
RARP packet to be processed by a BOOTP server or an RARP server.
If you specified values for these parameters in the Installation Options screen,
the Installation Utility adds the following lines under the subroutine Protocol
TCPIP:

PCTCP.INI File

The PCTCP.INI file is used to configure the FTP stack. PCTCP.INI is provided
on the FTP stack disk and is modified by the Install Tool to incorporate the IP
address information.
[[pctcp time]
time-zone-subsection = us-pst
dst-begins = 94
dst-ends = 305
[pctcp time us-pst]
time-zone-name = PST
time-zone-full-name = US/Pacific Standard Time
time-zone-offset = 8:00
dst-rule = US Federal
dst-name = PDT
dst-offset = 7:00
dst-begin-day = M4.1.0
dst-end-day = M10.5.0
dst-begin-time = 2:00
dst-end-time = 2:00
[pctcp ifcust 0]
ip-address =
subnet-mask =
router =
interface-type = PKTDRV
frame-type = DIX-Ethernet
A-20
ip_router defaultrouter
subnetmask
ip_netmask
ip_address ipaddress