Minimum Files For Lan Workplace Installations - Intermec JANUS JG2010 User Manual

JANUS 2.4 GHz Installation Utility User's Manual (4MB)

Minimum Files for LAN WorkPlace Installations

Intermec recommends that you install LAN WorkPlace for DOS on a host PC
that does not already have other copies/versions of LAN WorkPlace installed
and perform a full LAN WorkPlace installation. Then, you can use the host PC
with the full copy of LAN WorkPlace as the host PC.
When you install LAN WorkPlace for DOS on a host PC that already has other
copies/versions of LAN WorkPlace, Novell's LAN WorkPlace installation
procedure may not perform a full installation. If this occurs, this may cause the
Installation Utility to fail. When you specify a LAN WorkPlace installation to
the Installation Utility, it checks for certain files in certain directories and the
existence of the HSTACC directory. For example, if you specify that you are
installing LAN WorkPlace v5.0 and C:\NET as the LAN WorkPlace directory to
for the installation, the Installation Utility verifies that the following paths exist:
C:\NET\BIN\TCPIP.EXE (file)
C:\NET\BIN\LSL.COM (file)
(Or, have C:\NET\BIN\STARTNET.BAT start with path\LSL.COM)
C:\NET\BIN\FTP.EXE (file)
C:\NET\BIN\FTP.MSG (file)
C:\NET\BIN\TNVT220.EXE (file)
C:\NET\BIN\TNVT220.MSG (file)
C:\NET\BIN\LWP.MSG (file)
C:\NET\BIN\TELAPI.EXE (file)
C:\NET\BIN\TELAPI.MSG (file)
C:\NET\BIN\TELSVC.EXE (file)
C:\NET\BIN\TELSVC.MSG (file)
C:\NET\HSTACC\EXTMAP.BIN (file)
C:\NET\HSTACC\HOSTTOPC.MAP (file)
C:\NET\HSTACC\PCTOHOST.MAP (file)
C:\NET\HSTACC\T4_DEF.PAR (file)
C:\TCP\HOSTS (optional file, but will generate message if it does not exist)
C:\TCP\SERVICES (directory)
C:\TCP\NETWORKS (directory)
C:\TCP\PROTOCOL (directory)
A-30