Customizing The J24Te.ini File - Intermec JANUS JG2010 User Manual

JANUS 2.4 GHz Installation Utility User's Manual (4MB)

Customizing the J24TE.INI File

For Intermec terminal emulation installations, the J24TE.INI file is copied from
the TE Applications disk to a subdirectory on your host PC. You may want to
customize the J24TE.INI file to permanently change your JANUS operating
environment. You can customize the J24TE.INI file to enable or disable
supported symbologies or to change other operating parameters such as beep
volume, display, viewport size and movement.
To customize the J24TE.INI file
1. Shell out to DOS during the installation process.
2. Type the following command from a DOS prompt on the host PC to start
3. After Intersvr is running, remove the Installation Utility disk from drive A.
4. Reboot the JANUS device by pressing
5. At the JANUS DOS prompt, type
6. Select the LOAD option from the File menu.
7. Select the IM_FLASH\ directory and press
8. Select the DRIVEC\ directory and press
9. Select J24TE.INI and press
10. Use IC.EXE to make your configuration changes. See your JANUS user's
B-10
Intersvr on the host.
a:intersvr
Note: Drive A must be empty or this process will not work.
device boots, the Microsoft Interlnk Server Version Intermec menu appears
along with the server/client drive mapping screen.
Note: If you do not reboot the JANUS device while Intersvr is running on the host
PC, Interlnk will not load on the JANUS device and you will not be able to access
the drives on the host PC.
configuration application (IC.EXE).
manual for more information on IC.EXE.
. When the JANUS
and press
.
.
.
to start the