Table of Contents
Advertisement
SAFETY LOCKS
3.1.3 ASPHALT CUTTER LOCKS
(if installed)
IMPORTANT
When travelling on roads, always position the asphalt
q
cutter following the longitudinal axis of the vehicle, ap-
ply the safety locks and lock the equipment control by
shifting the safety device lever to the lock position.
If the machine is equipped with asphalt cutter, besides ap-
q
plying the antirotation lock already described for the stand-
ard machine (see "3.1.1 LOADER LOCKS"), it is also
necessary to apply the lock (1) on the lifting jacks, in such a
way as to keep the equipment at a given distance from the
ground.
56
1
RWAA4190
RWAA4200
Advertisement
Table of Contents
