Komatsu SK818-5 Operation & Maintenance Manual page 80

INSTRUMENTS AND CONTROLS
ISO PATTERN CONTROL SYSTEM
The procedures to be followed to use any control systems different from the ISO and OPTION PATTER-
q
NS are described in section "OPTIONAL EQUIPMENT" (See "6.5 HAND & FOOT CONTROL SYSTEM").
Carefully read and be sure to understand the contents of this section before using the machine.
2 - LEFT SERVO CONTROL LEVER (TRAVEL AND STEERING)
Before carrying out any manoeuvre with this lever, the operator must be seated in the work position with
q
fastened safety belt; before every manoeuvre the operator must take all the precautions indicated "3.6.5
HOW TO MOVE THE MACHINE (ISO PATTERN CONTROL SYSTEMERN)".
Before moving, make sure that the parking brake is disengaged.
q
When travelling on roads, make sure that all the safety devices have been engaged.
q
Failure to comply with these rules may lead to serious accidents.
q
The travel control lever (2) is positioned on the operatorís left
and serves to control the forward and reverse movements and
the steering of the machine, according to the movements indi-
cated in the diagram.
N - Neutral
A - Forward gear
B - Counterrotation to the right
C - Reverse gear
D - Counterrotation to the left
78
CAUTION
WARNING
F
A
D
N
B
C
R
2
RWAA9780
RWA22410