2.8.18 COOLING FAN AND FAN BELT
Be careful to the rotating parts and do not allow anyone to
q
get too close to these parts, since clothes or parts of the bo-
dy may get caught into them.
If hands, clothes, or tools get entangled in the fan blades or
q
the fan belt, they may be cut, torn or seriously damaged; for
this reason, avoid touching the rotating parts.
2.8.19 WASTE MATERIALS
Do not dispose of used oil in the sewer system, rivers, etc.
q
Always put used oil in containers. Never drain oil directly on
q
to the ground.
Keep to the laws and regulations in force when disposing of
q
harmful substances such as oil, fuel, solvents, used filters
and batteries.
2.8.20 PRECAUTIONS TO BE TAKEN
WHEN INFLATING THE TYRES
Always bear in mind that tyres can burst while being inflated,
q
causing serious accidents.
Before inflating the tyres, always check the wheel rims and
q
the tyre walls and tread for dents, cuts, broken plies, or other
defects.
Have a tyre expert perform checks and tyre maintenance.
q
When inflating the tyres, use a compressed air gun with ex-
q
tension hose and pressure gauge.
Make sure that there is nobody in the vicinity before starting
q
to inflate a tyre. Stand at the tread or outer belt side of the
tyre to inflate it.
Never exceed the inflation pressures specified for each type
q
of tyre. Always make sure that the tyre pressures are identi-
cal on both sides of the machine .
PRECAUTIONS TO BE TAKEN DURING MAINTENANCE
RWA01660
RWA01670
RWA20900
49