GUARDS AND DRIVER'S SEAT
3.5.2 REAR PANEL
Do not open the rear panel when the engine is running.
q
Do not use the machine without the rear panel and do
q
not start the engine with open panel if this is not ex-
pressly prescribed for certain maintenance operations.
Non-compliance with these rules may lead to serious
q
accidents.
When inspecting or carrying out a maintenance opera-
q
tion inside the rear panel, always engage the panel in
the safety coupling to keep it open.
NOTE
The rear panel can be opened only after opening the engine
q
hood.
To reach the release lever (2) of the rear panel (1), raise the
engine hood (see "3.5.1 ENGINE HOOD").
To open the rear cover (1), lift the lever (2) positioned on the
inner left side of the machine, at the same time rotate the cov-
er to the maximum opening position and fix it with the retainer
(3), by proceeding as follows:
1 - Lift the retainer (3) and rotate it clockwise until it rests
against the rear cover (1).
2 - Release the retainer (3) and make sure that it has been
engaged correctly.
To close the rear cover (1), release the retainer (3), rotate it
anticlockwise and make it rest against the rear cover (1).
100
WARNING
3
1
RWAA13290
RWAA13250
RWAA13260
2
RWAA13270
3
RWAA13280