Precautions To Be Taken During Maintenance; Warning Plates; Tools - Komatsu SK818-5 Operation & Maintenance Manual

2.8 PRECAUTIONS TO BE TAKEN DURING MAINTENANCE

2.8.1 WARNING PLATES

Before starting any maintenance operation, position the ma-
q
chine on a firm and level surface, rest the equipment on to
the ground, engage the safety locks of either the equipment
and the controls and stop the engine.
If another person starts the engine and operates the control
q
levers while the operator is providing for service, this may re-
sult in serious injuries or even death.
To avoid these risks, always attach warning plates to the
q
control levers and to the ignition key before performing any
maintenance operation; if necessary, attach additional war-
ning tags also around the machine and in particular on the
cab handles.

2.8.2 TOOLS

Use only the tools provided with the machine and high-quali-
q
ty tools suitable for the tasks to be performed.
Do not use worn, damaged, low-quality tools or tools that are
q
not suitable for the tasks to be performed, in order to avoid
any personal injury.
After use, always put the tools in the appropriate compart-
q
ment (1) positioned behind the driverís seat.
PRECAUTIONS TO BE TAKEN DURING MAINTENANCE
1
DO NOT
START
ENGINE
RWA01210
RWA37400
RWA01310
RWAA11770
43