Connecting The Bucket - Komatsu SK818-5 Operation & Maintenance Manual

USING THE WORK EQUIPMENT

3.13.7.2 CONNECTING THE BUCKET

Avoid using your fingers to align the holes, since they
q
may be cut in case of sudden or uncontrolled movemen-
ts.
1 - Make sure that the lever (1) is rotated completely to the
left and that the coupling pins (2) have moved completely
backward.
2 - Incline the tool-holder (3) forward and gradually approach
the bucket (4) until centering its upper lip with the edge of
the tool-holder cross member.
3 - Slowly raise the arm and at the same time fold the tool-
holder until it is completely engaged in its seat.
4 - Fold the bucket completely.
5 - Stop the engine, release the residual pressures and lock
the safety bars.
6 - Couple the bucket by rotating the lever (1) completely to
the right and fix it in this position with the retainer (5).
Before moving the machine, make sure that the pins (2)
are completely engaged in the seats provided on the buc-
ket.
140
WARNING
1
4
2
2
RWAA10240
3
RWAA9990
1
RWAA10000
RWAA11510