Checking The Oil Level In The Final Transmissions - Komatsu SK818-5 Operation & Maintenance Manual

MAINTENANCE PROCEDURE
4.8.6.e CHECKING THE OIL LEVEL IN THE
FINAL TRANSMISSIONS
This check must be carried out on each transmission, with the
machine at rest on level ground.
The check is visual and serves to verify that the lubricant rea-
ches the height of the hole (1); if this is not the case, top up
using the recommended type of oil.
(See "4.3 FUEL, COOLANT AND LUBRICANTS").
Use a 19 mm hexagon spanner.
188
1
RWAA10260
RWAA10730