Komatsu SK818-5 Operation & Maintenance Manual page 96

INSTRUMENTS AND CONTROLS
13 - RIGHT STABILIZER CONTROL (IF INSTALLED)
Before moving the machine in any way, make sure that
q
the stabilizer feet are completely raised.
Before travelling on roads, make sure that the safety
q
locks of the stabilizer feet have been applied.
The right stabilizer is operated by means of the button (1) in-
stalled on the left console and according to the indicated posi-
tions.
1 - Press the button forward to lower the stabilizer feet.
2 - Press the button backward to raise the stabilizer feet.
14 - LEFT STABILIZER CONTROL (IF INSTALLED)
Before moving the machine in any way, make sure that
q
the stabilizer feet are completely raised.
Before travelling on roads, make sure that the safety
q
locks of the stabilizer feet have been applied.
The left stabilizer is operated by means of the button (1) in-
stalled on the left console and according to the indicated posi-
tions.
1 - Press the button forward to lower the stabilizer feet.
2 - Press the button backward to raise the stabilizer feet.
15 - OPTIONALS
The right three-button joystick is used when the operator
needs to connect electro-hydraulic equipment with several
functions.
Each push button corresponds to an electric line activated by
a pulse control: press the push button to activate the electric
contact; release the push button to deactivate the contact.
94
WARNING
WARNING
1
RWA36010
1
RWA36020
A B
C
C
A B
+
C
N
N
A
-
B
RWAB1120