Operational Checks - Komatsu SK818-5 Operation & Maintenance Manual

USE OF THE MACHINE
3.6.1.3

OPERATIONAL CHECKS

All the checks must be carried out by the operator while
q
seated, with fastened safety belt.
If the machine has been stopped after use or in order to
q
carry out maintenance operations, the safety devices
may have been inadvertently disconnected; when the
operator gets on the cab, he must make sure that all the
safety locks of the equipment controls are in the correct
position and therefore that the equipment cannot move
suddenly and cause accidents.
The checks concern:
1 - the locking of the safety bars;
2 - the hand accelerator idling position;
3 - the neutral position of the controls;
4 - the application of the parking brake.
The following check is carried out by turning the ignition key to
position « » in order to apply voltage to the control panel and
check the functionality of the acoustic alarm, of the fuel level
indicator and of the engine oil pressure, generator and prehea-
ting warning lights.
108
WARNING
RWA01960