Table of Contents
Advertisement
INSTRUMENTS AND CONTROLS
10 - SPEED INCREASE CONTROL
The button (1) that allows the machine travel speed to be in-
creased is positioned on the left joystick grip.
When the button is pressed, the speed increases; release the
button to return to normal speed.
The speed increase function should be used only for the
q
fast speed transfers of the machine; in any other case, it
is advisable to use the normal speed.
Do not use the speed increase control when performing
q
steering or counterrotation manoeuvres.
11 - FLOATING DEVICE CONTROL
(IF INSTALLED)
The right joystick grip is provided with a switch (1) that when
pressed (WARNING LIGHT ON) (see "3.3.2 pos. 8 - FLOA-
TING DEVICE WARNING LIGHT"), frees the loader arm (float-
ing position), that is, allows it to automatically follow the
undulations of the ground.
Press the switch again to restore the standard operating con-
ditions (WARNING LIGHT OFF) ("3.3.2 pos. 8 - FLOATING
DEVICE WARNING LIGHT").
92
CAUTION
1
1
RWAA11320
RWAA11330
RWA35990
Advertisement
Table of Contents
