Table of Contents
Advertisement
It is strictly forbidden to modify the setting of the hydraulic system safety valves; Komatsu cannot be
q
held liable for any damage to persons, property or the machine, if this has been tampered with by modi-
fying the standard setting of the hydraulic system.
Before carrying out any electrical welding, disconnect the battery and the alternator (see "2.8.13 PRE-
q
CAUTIONS CONCERNING THE BATTERY AND THE ALTERNATOR").
Install only authorized additional equipment (see "6.1.4 CHARACTERISTICS OF THE OPTIONAL EQUIP-
q
MENT OF THE MACHINE VERSION WITH HIGH-FLOW AND SUPER-FLOW HYDRAULIC SYSTEM").
Travel on roads is allowed only if the machine is provided with appropriate lighting, signalling and safety
q
devices and properly authorized by the relevant papers.
Before travelling on roads, make sure that the equipment installed on the machine is homologated and
that the safety locks are correctly engaged.
It is absolutely forbidden to operate the machine while standing on the ground.
q
Every single manoeuvre must be carried out by the operator, correctly seated in driving position.
WARNING
WARNING
WARNING
WARNING
DANGER
INFORMATION ON SAFETY
3
Advertisement
Table of Contents
