Removing The Bucket Or The Equipment - Komatsu SK818-5 Operation & Maintenance Manual

3.13.7.1 REMOVING THE BUCKET OR THE
EQUIPMENT
Do not remove the bucket or the equipment when they
q
are lifted or when a suitable support is not available: if
they fall down, they may cause serious damage and
even death. Carry out all the operations with the bucket
or the equipment resting on the ground.
1 - Lower the arm completely and rest the bucket on to the
ground in horizontal position.
2 - Stop the engine, release the residual pressure and lock
the controls by lifting the safety bars in vertical position.
3 - Rotate the levers (1) towards the outside in vertical posi-
tion to release the coupling pins (2).
4 - Start the machine again and move gradually in reverse, at
the same time rotating the tool-holder plate (3) forward
until releasing it from the upper seat on the bucket (4).
WARNING
USING THE WORK EQUIPMENT
2
4
1
RWAA10000
RWAA11510
3
RWAA9990
139