3 - Slowly raise the arm and at the same time fold the tool-
holder until it is completely engaged in its seat.
4 - Fold the bucket completely.
5 - Stop the engine, release the residual pressures and lock
the safety bars.
6 - Couple the bucket by rotating the lever (1) completely to
the right and fix it in this position with the retainer (5).
Before moving the machine, make sure that the pins (2)
are completely engaged in the seats provided on the buc-
ket.
USING THE WORK EQUIPMENT
1
2
1
5
RWAA11900
RWAA11910
RWAA11920
137