Required Tools; Torque Values Of The Screw Connections; Sound Emission Information - Otto Bock C2000 Instructions For Use Manual

13.2 Required tools

The following tools are required for adjustments and maintenance work:
• Allen wrenches in sizes 3, 4, 5, 6
• Ring and open-ended wrenches in sizes 8, 10 and 13
• Phillips head screwdriver (size: 2)
• Flat screwdriver
• Tyre mounting levers and inner tube repair kit

13.3 Torque values of the screw connections

Unless otherwise specified, screw connections are tightened with the following torque values:
• Thread diameter M4: 3 Nm
• Thread diameter M5: 5 Nm
• Thread diameter M6: 10 Nm
• Thread diameter M8: 25 Nm

13.4 Sound emission information

INFORMATION
► The products in the series were tested for compliance with maximum sound emission requirements according
to the ISO 7176-14 standard.
► They fully meet the requirements according to the areas of application identified below.
Area of application
In enclosed rooms
Outside of enclosed rooms
1)
Depending on the area of application according to ISO 7176-14
C2000
Maximum sound pressure level
65 db(A)
75 db(A)
Appendices
1)
71