Appendices; Symbols Used - Otto Bock Genium X3 Instructions For Use Manual

Appendices

17 Appendices

17.1 Symbols Used

Manufacturer
Type BF applied part
Compliance with the requirements according to "FCC Part 15" (USA)
Compliance with the requirements under the "Radiocommunications Act" (AUS)
Compliance with the requirements under the "Radiocommunications Act" (AUS)
Non-ionising radiation
Protection against penetration of solid foreign objects with a diameter greater than 1 mm, no pro­
tection against water
Dustproof, protection against permanent submersion.
Maximum depth: 3 m
Maximum time: 1 hour
In some jurisdictions it is not permissible to dispose of these products with unsorted household
waste. Disposal that is not in accordance with the regulations of your country may have a detri­
mental impact on health and the environment. Please observe the instructions of your national
authority pertaining to return and collection.
The product's Bluetooth wireless module can establish a connection to mobile devices with the
following operating systems: iOS (iPhone, iPad, iPod...) and Android
Declaration of conformity according to the applicable European directives
Serial number (YYYY WW NNN)
YYYY – year of manufacture
WW – week of manufacture
NNN – sequential number
Lot number (PPPP YYYY WW)
PPPP – plant
YYYY – year of manufacture
WW – week of manufacture
Caution, hot surface
54 Genium X3 - Bionic Prosthetic System 3B5-X3/3B5-X3=ST,Ge­
nium X3 3B5-2/3B5-2=ST