Otto Bock Genium X3 Instructions For Use Manual page 62

Appendices
Table 6 – Recommended safe distances between portable and mobile HF telecommunication equipment
and the product 'Genium X3 - Bionic Prosthetic System 3B5-X3 / Genium X3 3B5-2' – for non-life-sustain­
ing devices and systems
Directives and manufacturer's declaration – Recommended safe distances between portable and mobile
HF telecommunication equipment and the product 'Genium X3 - Bionic Prosthetic System 3B5-X3 /
Genium X3 3B5-2'
The product 'Genium X3 - Bionic Prosthetic System 3B5-X3 / Genium X3 3B5-2' is designed for operation in an
electromagnetic environment where HF interference is monitored. The customer or user of the product 'Genium
X3 - Bionic Prosthetic System 3B5-X3 / Genium X3 3B5-2' can help prevent electromagnetic interference by com­
plying with the minimum distances between wearable and mobile HF communication equipment (transmitters)
and the product 'Genium X3 - Bionic Prosthetic System 3B5-X3 / Genium X3 3B5-2', as below according to the
maximum output of the communication equipment.
Nominal output of trans­
mitter [W]
0.01
0.1
1
10
100
For transmitters with no maximum nominal output specified in the table above, the recommended safety distance
d in metres (m) can be determined using the equation in the respective column, where P stands for the maximum
nominal output of the transmitter in watts (W) according to the transmitter manufacturer's information.
Note 1: The higher frequency range applies at 80 MHz and 800 MHz.
Note 2: These directives may not be applicable in all cases. The propagation of electromagnetic factors is influ­
enced by absorption and reflection by buildings, objects and people.
62
Safety distance [m] by transmission frequency
150 kHz to 80 MHz
N/A
N/A
N/A
N/A
N/A
80 MHz to 800 MHz
d = 0.3 √P
0.03
0.09
0.3
0.95
3
Genium X3 - Bionic Prosthetic System 3B5-X3/3B5-X3=ST,Ge­
800 MHz to 2.5 GHz
d = 2.3 √P
0.23
0.73
2.3
7.3
23
nium X3 3B5-2/3B5-2=ST