Appendices; Symbols Used - Otto Bock Genium X3 3B5-3 Instructions For Use Manual

Appendices

Power supply unit
Reference number
Type
Storage and transport in original packaging
Storage and transport without packaging
Operation
Input voltage
Mains frequency
Output voltage
Battery charger
Reference number
Storage and transport in original packaging
Storage and transport without packaging
Operation
Protection rating
Input voltage
Wireless technology
Frequency range
Modulation
Maximum output power (EIRP)
Cockpit app
Reference number
Version
Supported operating system
Website for download
Torque values of the screw connections
Using a torque wrench, tighten the corresponding screws alternately in several cycles until the specified tightening
torque is reached.
Screw connection
Tube adapter on prosthetic foot
Tube clamp of the knee joint
Proximal prosthesis components with pyramid receiver
Proximal prosthesis components with threaded connect­
or
Flexion stop
17 Appendices

17.1 Symbols Used

Manufacturer
104
757L16-4
FW8001M/12
-40 °C/-40 °F to +70 °C/+158 °F
10% to 95% relative humidity, non-condensing
-40 °C/-40 °F to +70 °C/+158 °F
10% to 95% relative humidity, non-condensing
0 °C/+32 °F to +50 °C/+122 °F
Max. 95% relative humidity
Air pressure: 70–106 kPa (up to 3,000 m without pres­
sure equalisation)
100 V~ to 240 V~
50 Hz to 60 Hz
12 V
4E60*
-25 °C to 70 °C/-13 °F to 158 °F
-25 °C to 70 °C/-13 °F to 158 °F
Max. 93% relative humidity, non-condensing
5 °C to 40 °C/41 °F to 104 °F
Max. 93% relative humidity, non-condensing
IP40
12 V
Proprietary protocol
270 kHz to 450 kHz
ASK, load modulation
-12.7 dBµA/m @ 10 m
4X441-V2=IOS Cockpit/4X441-V2=ANDR Cockpit
Version 2.5.0 or higher
See the information in the respective online store (e.g.
Apple App Store, Google Play Store, etc.) regarding
compatibility with mobile devices and versions.
https://www.ottobock.com/cockpitapp
Tightening torque
15 Nm / 133 lbf. In.
7 Nm / 62 lbf. In.
15 Nm / 133 lbf. In.
10 Nm / 89 lbf. In.
1 Nm / 5 lbf. In.
Genium X3 3B5-3/3B5-3=ST