Appendices; Symbols Used - Otto Bock Genium 3B1-3 Instructions For Use Manual

Power supply unit
Operation
Input voltage
Mains frequency
Output voltage
Battery charger
Reference number
Storage and transport in original packaging
Storage and transport without packaging
Operation
Protection rating
Input voltage
Wireless technology
Frequency range
Modulation
Maximum output power (EIRP)
Cockpit app
Reference number
Supported operating system
Website for download
Torque values of the screw connections
Using a torque wrench, tighten the corresponding screws alternately in several cycles until the specified tightening
torque is reached.
Screw connection
Tube adapter on prosthetic foot
Tube clamp of the knee joint
Proximal prosthesis components with pyramid receiver
Proximal prosthesis components with threaded connect­
or
Flexion stop

17 Appendices

17.1 Symbols Used

Manufacturer
Type BF applied part
Compliance with the requirements according to "FCC Part 15" (USA)
Compliance with the requirements under the "Radiocommunications Act" (AUS)
Genium 3B1-3/3B1-3=ST
0 °C/+32 °F to +50 °C/+122 °F
Max. 95% relative humidity
Air pressure: 70–106 kPa (up to 3,000 m without pres­
sure equalisation)
100 V~ to 240 V~
50 Hz to 60 Hz
12 V
4E60*
-25 °C to 70 °C/-13 °F to 158 °F
-25 °C to 70 °C/-13 °F to 158 °F
Max. 93% relative humidity, non-condensing
5 °C to 40 °C/41 °F to 104 °F
Max. 93% relative humidity, non-condensing
IP40
12 V
Proprietary protocol
270 kHz to 450 kHz
ASK, load modulation
-12.7 dBµA/m @ 10 m
4X441-IOS=*/4X441-Andr=V* Cockpit
iOS 10.0/Android 5.0 or higher
http://www.ottobock.com/cockpitapp
Tightening torque
15 Nm / 133 lbf. In.
7 Nm / 62 lbf. In.
15 Nm / 133 lbf. In.
10 Nm / 89 lbf. In.
1 Nm / 5 lbf. In.
Appendices
51