Product Description - Otto Bock Dynion 3R85 Instructions For Use Manual

Numbering for a defined sequence
1
J
Right
Observe the safety notice in the section!
Replace
1.3 Characteristics (product, document)
1
(Page: 2): The following characteristics are important for identification:
• : 3R85 [product reference number]
• : YYYYWWNNNN [product serial number: YYYY (year of manufacture); WW (calendar
week); NNNN (number)]
• : 647G1166=all_INT-VV-YYMM [standard line for the document: 647G1166=all_INT (refer­
ence number for the document); VV (version number); YYMM (publication date) – YY (year);
MM (month)]
1.4 Document versions
2
(Page: 2): The document is available in the following versions:
• : 647G1166=all_INT (document reference number with all available languages)
All illustrations in this document are found at the beginning. They are followed by the texts in
all languages.
This printed document is included in the scope of delivery.
This document is available in electronic form (PDF file).
• : 647G1166=XX_INT (document reference number as single-language version)
647G1166=en_INT (example of single-language version in en = English)
All illustrations in this document are found in the respective sections.
This document is available in electronic form (PDF file).
• XX (variable for the language codes of the languages in which the single-language version
is available)
The following additional documents are available in electronic form (PDF file):
• 646D1504=de_INT (Kurzanleitung)
• 646D1504=en_INT (Quick reference guide)
The documents in electronic form are available as follows:
• Download via the manufacturer's download portal under the QR code and link provided
https://product-documents.ottobock.com/IFU/INT/3R85/647G1166/10/O/S/F

2 Product description

The product (3R85) has the following key features:
• Monocentric prosthetic knee joint with rotation hydraulics
• Product components for stance phase stability:
- Adjustable stance phase flexion resistance (hydraulic damping)
- Adjustable switching threshold to deactivate stance phase flexion resistance at the end of
the stance phase
- Modes (switching by the patient):
Standard mode – stance phase flexion resistance activated
Cycling mode – stance phase flexion resistance deactivated
- Lock (activation and deactivation by the patient)
• Product components for swing phase control:
- Adjustable swing phase flexion resistance (hydraulic damping)
Numbering for the parts of an illustration
1
Wrong
Risk of falling
Movement against a stop
37