CONFIG
SCAN
Front Panel Operation
Setup Menus
Displays the sub menu that provides the following functions.
•
ADDRESS
Displays the following message.
GPIB Address = Address
Press the arrow key to set the desired GPIB address. Then, press the
make the setup effective, or press the
•
REVISION
Displays the following message.
X.XX.XX
where X.XX.XX shows the firmware revision.
To return to the previous menu, press the
•
UNIT
Displays the following message.
Slot#: model, X
where # is 1, 2, 3, or 4, model is the model number of the module, X is the
revision of the module.
To display another message, press the arrow key.
To return to the previous menu, press the
Displays the following message.
NO
Press the arrow key to set YES. Then, press the
couple ports automatically, or press the
couple ports will be the input ports the Kelvin cable is connected.
3-32
key to cancel changing the setup.
Exit
key.
Exit
key.
Exit
key to detect and set the input
Enter
key to cancel this operation. The input
Exit
Agilent B2200 User's Guide, Edition 2
key to
Enter