[:Route]:Connection:rule - Agilent Technologies B2200A User Manual

Example
Syntax
Query response
Example
OUTPUT @Agb2200;":ROUT:CLOS (@10101,10202)"
OUTPUT @Agb2200;":ROUT:CLOS? (@10101,10102,10201,10202)"
ENTER @Agb2200;A$
In this example, A$ will be 1,0,0,1.

[:ROUTe]:CONNection:RULE

This command sets the connection rule (Free or Single Route) for the specified card.
The query returns the connection rule of the specified card. At *RST, all cards are
set to FREE. See "Connection Rule" on page 3-14.
[:ROUTe]:CONNection:RULE card_number,rule
[:ROUTe]:CONNection:RULE? card_number
Parameter
card_number
rule
FREE or SROU <newline><^END>
OUTPUT @Agb2200;":ROUT:CONN:RULE ALL,SROU"
OUTPUT @Agb2200;":ROUT:CONN:RULE? 1"
ENTER @Agb2200;A$
In this example, A$ will be SROU.
Agilent B2200 User's Guide, Edition 2
Explanation
For Auto Config mode: 0 or ALL
For Normal Config mode: 1, 2, 3, 4, or ALL
ALL is not available for query.
FREE (free route) or SROUte (single route).
In the free route, multiple channel connections are
available for all input ports.
In the single route, only 1 channel connection is available
for each input port.
SCPI Command Reference
[:ROUTe]:CONNection:RULE
5-35